
 |
 |
 |
Unexposed Face
at Start of Test |
Fire Exposed Face
before Start of Test |
Unexposed Face
after 6 minutes of Test
(Note smoke from the surface coating) |
 |
 |
|
Unexposed Face
after 4 hours 1 minute of Test |
Unexposed
Face
after 6 hours of Test
(Note remnants of Zinc Chromate Primer on Slats) |
FIRE SHUTTER'S SPECIFICATION :
High quality Electro Galvanised BMCold Roll Steel Slats JIS G 3313 or BS 4360 A
Grade 43A, Heavy-Duty MS Steel tubular pipes, safety plates, shaft-bolts, etc with steel
sheets of 1.6mm gauge for Casing Covers fitted into two parts including Roller Shafts
& it's mechanism of JIS-G-3101 or BS 4360 are all prime coasted with Fire Resistance
anti corrosive zinc chromate serve as a fire resistance coating for steel & water seal
design all providing strength, durability, trouble-free operation to satisfy the specified
requirements of a complete unit Fire Resistance Steel Roller Shutter Doors for protection
of lives & properties. Standard : BS 476 Part 22 1987.
| POWER
OPERATOR SAFETY DEVICE / FEATURES : |
|
Remote control the shutter door
within 10M distance. |
|
Automatically stop the power
operation when any object under the shutter door. BCMS System can be apply and
incorporated. |
|
The tension wire will be
released and limit switch will be active. The stop signal will be received by remote
control and stop the power operator for one minute then re-start. |
|
Emergency chain-pull devise
provided in the event of power failure. |
|
|
| FIRE
SHUTTERS's FUNCTIONS : |
|
Securities |
|
Fire Prevention |
|
Save life and Properties |
| STANDARD HEAVY-DUTY SIDE
GUIDE RAILS AND BOTTOM BARS FOR FIRE SHUTTERS |
OPTIONAL ITEMS :
Heat-Detectors, Alarm & Flashlights, Auto-stop Safety Devices,
Delay Timers, Wireless Remote Control, Photo Eyes, Digital Touch Switches, Card Control
Switches ( for power operations). |
STEEL BASE
METAL :
Electro Galvanised Steel, Galvanised Steel, Mild Steel, Stainless Steel for
Interlocking Slats.
NB: All major steel parts and components shall be apply with anti-corrosive fire
resistance zinc chromate except electronic components such as Power-Operators, etc. |
| Zincalume Steel Slats
available upon request. (coated steel 43.5% zinc, 55% aluminium and 1.5% silicon).
Recommended without paint/or other finishes or resistance to scratch/corrosion for non
fire rated shutter. |



Address: No. 11 & 11A, Jalan 7/1, Taman
Industri Selesa Jaya,
Off Jalan Balakong Cheras, 43300 Selangor Darul Ehsan, Malaysia.
Tel No: 603 - 8961 5404, 8961 5343
Fax No: 603 - 8961 5344
Mobile No: 012-351 7348, 019-215 7275
Url: http://www.mnisb.com.my
Email: sktan@mnisb.com.my
[ About MNI ] [ Business
Enquiry ] [ Back To Main ]
[ Fire Rated Roller
Shutter Doors ] [ Other Shutter
Doors ] [ Tiles ]
Designed and Maintained by WebWork-Solutions.com
Copyright © 2000 -
|